CAUTION
Do not plug in or unplug blower motor
connectors while the power is on.
Failure to do so may result in motor failure.
Thermostat
8403-067
8403-060
(1120-445)
CSB9E-THO
CSB9E-THOC
GENERAL
This unit is equipped with a variable speed ECM
motor. The motor is designed to maintain rated airflow
up to the maximum static allowed. It is important
that the blower motor plugs are not plugged in or
unplugged while the power is on. Failure to remove
power prior to unplugging or plugging in the motor
could result in motor failure.
TABLE 4
WALL THERMOSTATS & CONTROLS
Predominant Features
Carbon Dioxide Sensor with LCD for
Sensor Readings
3 stage Cool; 3 stage Heat
Programmable/Non-Programmable Electronic
HP or Conventional
Auto or Manual changeover
3 stage Cool; 3 stage Heat
Programmable/Non-Programmable Electronic
HP or Conventional
Auto or Manual changeover
with Humidity Contol
BacNet MS/TP or Ethernet Connection
3 stage Cool; 3 stage Heat
Programmable/Non-Programmable Electronic
HP or Conventional
Auto or Manual changeover
with CO
& Humidity Contol
2
BacNet MS/TP or Ethernet Connection
FIGURE 16
MIS-1285
Manual
2100-603
Page
21 of 44