Samsung NX58F5500SB User Manual page 58

Maintaining your appliance
Before a self-cleaning cycle
NOTE
Remove the racks. Leaving the oven racks in the oven during a self-cleaning cycle
will discolor the oven racks and make them difficult to slide in and out of position.
WARNING
Do NOT use the surface burners while the oven is operating in the self clean mode.
NOTE
Before a self-cleaning, check whether the door is locked.
58 English
NX58F5300SS_AA_DG68-00509A-06_EN+MES.indb 58
• Make sure the door lock feature is
turned off and the oven is cool. If they
are not, the self-cleaning cycle will not
start.
• A blinking Lock icon indicates the oven
door is in the process of being locked.
•
•
How to set the oven for self-cleaning
1. Make sure the oven door is completely
2. Press the Self Clean pad on the oven
When the Lock icon is on, the oven door
is locked.
When Loc is shown in the display, it
indicates the door lock feature is on.
Press and hold the Start/Set pad for 3
seconds to unlock the oven controls.
closed.
control panel.
Press the pad once for a 2-hour cleaning
cycle, twice for a 3-hour cleaning cycle,
or three times for a 4-hour cleaning
cycle.
Pressing the pad a fourth time will
reselect the 2-hour default time.
The display will show Clean, and the
Start indicator will blink under the
selected cleaning cycle time.
2018-08-30 12:07:33