Samsung NX58F5500SB User Manual page 53

Maintaining your appliance
NX58F5300SS_AA_DG68-00509A-06_EN+MES.indb 53
10. Push in and turn each surface burner
control knob to the LITE position, let
each burner light, and then set each
control knob back to a burner setting
to make sure each burner operates
properly.
Cooktop surface
The cooktop surface is a porcelain-enamel surface. To prevent this surface from
becoming dull, wipe up and clean spills as they happen. Foods with a lot of acid
(tomatoes, sauerkraut, fruit juices, etc.) or foods with high sugar content can cause
dull spots if allowed to set.
WARNING
Do not use a steel-wool pad or abrasive cleaners on porcelain-enamel surfaces.
Abrasive pads and cleaners will scratch and damage the surface.
1. Make sure all surface burners are OFF.
2. When surfaces have cooled, remove the
burner grates.
English 53
2018-08-30 12:07:31