Table of Contents
Advertisement
●
Port Range: Select the port range.
Add: Click to add the rule profile to the table at the bottom of the screen.
Update: Click to update information for the rule if you have selected a list item and have
made changes.
Delete: Select a list item and click Delete to remove the item from the list.
New: Click New to erase all fields and enter new information.
Priority Up: Select a rule from the list and click Priority Up to increase the priority of the
rule.
Priority Down: Select a rule from the list and click Priority Down to decrease the priority
of the rule.
Update Priority: After increasing or decreasing the priority of a rule, click Update
Priority to save the changes.
3.6 Management
Management enables you to set up SNMP and Remote Management feature.
3.6.1
SNMP
This screen enables you to configure SNMP.
Enabled/Disabled: Click to enable or disable SNMP.
System Name: Displays the name given to the router.
System Location: Displays the location of the router (normally, the DNS name).
System Contact: Displays the contact information for the person responsible for the
router.
Community: SNMP system name for exchanging SNMP community messages. The
name can be used to limit SNMP messages passing through the network. The default
name is 'public.'
Trap Receiver: Type the name of the destination PC that will receive trap messages.
38
Hide quick links:
Advertisement
Table of Contents
