Wireless; Basic - Encore ENHWI-SG User Manual

3.2 Wireless

This section enables you to set wireless communications parameters for the router's
wireless LAN feature.
3.2.1

Basic

This page allow you to enable and disable the wireless LAN function, create a SSID,
and select the channel for wireless communications.
Enable/Disable: Enables and disables wireless LAN via the router.
SSID: Type an SSID in the text box. The SSID of any wireless device must match the
SSID typed here in order for the wireless device to access the LAN and WAN via the
router.
Channel: Select a transmission channel for wireless communications. The channel of
any wireless device must match the channel selected here in order for the wireless
device to access the LAN and WAN via the router.
Super G mode: Super G mode is disabled by selecting "Disable" from the drop list. If
you like to use Super G to enhance the speed, there are three options on Super G
mode: Super G without turbo; Super G with Dynamic turbo and Super G with Static
turbo. Turbo mode indicates the combination of two channels to enhance the
throughput. Super G without turbo indicates that it is on Super G mode without the
channel's combination. Dynamic turbo is able to automatically detect if any 'SuperG
based' product is available. If no, the connection is via 'normal' G.. Static turbo
means it will not go back to 'normal' G once it starts.
Extended Range Mode: Enable and disable wireless LAN via router.
17