Using Adminmanager; Installation - Oki ES7411 Network Manual

5. Select Install Network Card Setup link.
6. Select your language.
7. Select Oki Device Quick Setup and follow the on-screen instructions.
8. When the settings are correct, click Execute. The new settings are transmitted to
the network card but it still operates with pre-transmission settings.
9. Click Finish to validate the new settings.
10. Switch the printer off for 15 seconds and on again.
U A M
SING DMIN ANAGER
NOTE
Not all utilities, features or protocols are supported by every operating
system. Please check with your support website for latest information.
AdminManager is a powerful Microsoft Windows-based utility to configure all network
interface functions easily and intuitively via a graphical user interface.
Configuration requires a PC with a supported Windows operating system (see
running TCP/IP or IPX/SPX (NetWare).
This utility can only be used on a PC that can be connected to the network with TCP/IP or
IPX/SPX and must be used on a PC that is located on the same segment as the printer.
I
NSTALLATION
1. Insert the DVD-ROM into the DVD-ROM drive. The Setup Utility starts automatically.
If it does not start, double-click \setup.exe (in the root directory) on the
DVD-ROM.
2. Select the appropriate language.
3. Navigate to and select Network Card Setup.
4. Select Install Network Card Setup link.
5. Select your language.
Network configuration > 9
page 8),