Network Configuration Using Adminmanager; Adminmanager Quick Setup - Oki C810n Network User's Manual

Network Configuration using
AdminManager

AdminManager Quick Setup

Not all utilities, features or protocols are
supported by every product. See the front cover
of this manual for a listing of the items
supported by your product.
The AdminManager Quick Setup utility allows you to configure
the network interface easily and simply without installing any
software packages.
You can configure the following:
• Enable/disable TCP/IP, NetWare, EtherTalk, and NetBEUI
protocols.
• Set IP address, Subnet Mask and Gateway for TCP/IP
manually or by using DHCP.
• Set NetWare mode and create Queue/Print Server/Printer
objects.
• Set the Zone name and Port name for EtherTalk.
Configuration requires a PC with Windows XP or Vista
operating system, running TCP/IP or IPX/SPX (NetWare).
This utility can only be used on a PC that can be connected to
the network with TCP/IP or IPX/SPX.
This utility must be used on a PC that is located on the same
segment as the printer.
NOTE
Network User's Guide
12