Oki ES7411 Network Manual page 18

E-Mail (Send) Tab
ITEM
Use SMTP
Transmit
SMTP Server
Name
Printer E-Mail
Address
Destination
Address 1 - 5
When PERIOD is selected:
Check time
Period mode
When EVENT is selected:
Attach Info...
Comment...
Authentication...
EXPLANATION
Check to enable SMTP.
Enter name of the SMTP server.
Enter the printers e-mail address.
Set the following parameters:
Destination Address Set E-Mail address to which email
should be sent.
Notify Mode Select PERIOD or EVENT.
Used to set the interval at which the
selected events are checked. An e-
mail will be sent at the specified
interval for each event selected.
Set ENABLE (ON)/DISABLE (OFF) for
the events listed.
Event Mode Select:
ENABLE (ON), DISABLE (OFF) or
IMMEDIATE (NOWAIT) for the listed
events. If ENABLE (ON) is selected,
the check interval can be set (in
hours and intervals of 15 mins).
Select whichever information is to be included in the e-mail.
Set up to four lines of text to be included with the e-mail as
comments.
Used to set the following security information:
SMTP Authentication Check to Enable SMTP
Method authentication.
User ID Set the User ID for Authentication.
User Password Set the User Password for
Authentication.
Network configuration > 18