Table of Contents
Advertisement
[User] account
1
[Account]
Displays the account to change.
2
[New]
[User name]:
Enter the desired new user name. (Up to 16 characters in single
byte)
[Password]:
Enter the desired new password. (Up to 16 characters in single
byte)
[Password(Retype)]:
Enter the desired new password again.
[Change password] (For user rights)
Only the change of password is enabled under the user rights.
1
[Old Password]
Enter the current password.
2
[New Password]
Enter the desired new password. (Up to 16 characters in single
byte)
Note
f To change the account of the administrator, you must enter the [User name] and [Password] in [Current].
[Crestron Connected(TM)] page
The projector can be monitored/controlled with Crestron Connected.
It is necessary to access with the administrator rights to start the operation screen of Crestron Connected from the
web control screen. (The [Crestron Connected(TM)] button is not displayed in the web control screen with the user
rights.)
The operation page of Crestron Connected is displayed by clicking [Crestron Connected(TM)].
It is not displayed if Adobe Flash Player is not installed on your computer, or the browser you use does not
support Flash. In such a case, click [Back] in the operation page to go back to the previous page.
184 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
1
2
3
3
[OK]
Determines the change of password.
1
2
3
4
3
[Retype]
Enter the desired new password again.
4
[OK]
Determines the change of password.
Advertisement
Table of Contents
