Table of Contents
Advertisement
Deleting a lens memory
1)
Press as to select [LENS MEMORY].
2)
Press the <ENTER> button.
3)
Press as to select [LENS MEMORY EDIT].
4)
Press the <ENTER> button.
f The [LENS MEMORY EDIT] screen is displayed.
5)
Press as to select [LENS MEMORY DELETE].
6)
Press the <ENTER> button.
f The [LENS MEMORY DELETE] screen is displayed.
7)
Press as to select the item to delete, and press the <ENTER> button.
8)
When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Changing the lens memory name
1)
Press as to select [LENS MEMORY].
2)
Press the <ENTER> button.
3)
Press as to select [LENS MEMORY EDIT].
4)
Press the <ENTER> button.
f The [LENS MEMORY EDIT] screen is displayed.
5)
Press as to select [LENS MEMORY NAME CHANGE].
6)
Press the <ENTER> button.
f The [LENS MEMORY NAME CHANGE] screen is displayed.
7)
Press as to select the name to change, and press the <ENTER> button.
f The [LENS MEMORY NAME INPUT] screen is displayed.
8)
Press asqw to select the text, and press the <ENTER> button to enter the text.
9)
After the name is changed, press asqw to select [OK], and press the <ENTER> button.
f The registration completes and returns to the [LENS MEMORY NAME CHANGE] screen.
f If you press asqw to select [CANCEL] and then press the <ENTER> button, the changed name will not
be registered.
f If you press asqw to select [DEFAULT] and press the <ENTER> button, the changed name will not be
registered and the default name will be used.
f If you select [OK] without entering any characters and press the <ENTER> button, the default name will be
used.
[STATUS]
Display the status of the projector.
1)
Press as to select [STATUS].
2)
Press the <ENTER> button.
f The [STATUS] screen is displayed.
3)
Press qw to switch the pages.
f The page will change each time you press the button.
[PROJECTOR TYPE]
[PROJECTOR RUNTIME]
[LIGHT RUNTIME]
[MAIN/SUB VERSION]
148 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Displays the projector type and serial number of the projector.
Displays the runtime of the projector.
Displays the runtime of the light source 1 and the light source 2.
Displays the main and sub versions of the firmware of the projector.
Advertisement
Table of Contents
