Table of Contents
Advertisement
• If nozzle check pattern is not printed correctly:
If ink has not run out, perform print head cleaning and try printing the nozzle check pattern again.
• If problem is not resolved after performing print head cleaning twice:
Perform print head deep cleaning.
If the problem is not resolved after performing print head deep cleaning, turn off the printer and perform
print head deep cleaning again 24 hours later. When you turn the printer off, do not unplug it from the power
supply.
• If problem is not resolved after performing print head deep cleaning twice:
Ink may have run out. Replace the FINE cartridge.
When using paper with one printable surface, check the correct printable side
Check5
of the paper.
Printing on the wrong side of such paper may cause unclear prints or prints with reduced quality.
When you load paper on the rear tray, load paper with the printable side facing up. When you load paper in the
cassette, load paper with the printable side facing down.
Refer to the instruction manual supplied with the paper for detailed information on the printable side.
• When copying, see also the sections below:
Is platen glass dirty?
Check6
Clean the platen glass.
Cleaning Platen and Document Cover
Make sure original is properly loaded on platen.
Check7
When you load the original on the platen, load it with the side to be copied facing down.
Loading Originals
Is copy source a printed paper by printer?
Check8
If you use a printout done by this printer as the original, print quality may be reduced depending on the condition
of the original.
Print from the printer directly, or reprint from the computer if you can reprint from it.
394
Hide quick links:
Advertisement
Table of Contents
