Canon PIXMA TS5353 Online Manual page 380

Note
• IJ Network Device Setup Utility allows you to diagnose and repair the network status.
Select the link below to download IJ Network Device Setup Utility and install it.
Checking Printer Connection Status Using IJ Network Device Setup Utility
See below for starting up IJ Network Device Setup Utility.
For Windows:
Starting Up IJ Network Device Setup Utility
For macOS:
Starting Up IJ Network Device Setup Utility
Cannot Communicate with Printer while It Is in Wireless Direct
If your smartphone/tablet cannot communicate with the printer in the Wireless Direct, check the following.
Check the power status of printer and other devices (smartphone or tablet).
Check1
Turn on the printer or devices.
If the power is already turned on, cycle the power switch.
Is Wireless Direct enabled?
Check2
From the setup menu, select Device settings > LAN settings > Wireless Direct > Advanced mode in this
order and enable it.
Check the settings of your device (smartphone/tablet).
Check3
Make sure Wi-Fi is enabled on your device.
For details, refer to your device's instruction manual.
Make sure printer is selected as connection for device (e.g. smartphone or
Check4
tablet).
Select the network name (SSID) for Wireless Direct specified for the printer as the connection destination for
devices.
Check the destination on your device.
For details, refer to your device's instruction manual or visit the manufacturer's website.
To check the network name (SSID) for Wireless Direct specified for the printer, display it using the operation
panel of the printer or print out the network setting information of the printer.
• Display on the LCD.
LAN settings
• Print the network settings.
380