Port/Outlet Naming - ATEN KN2116VA User Manual

KVM over IP Switch User Manual

Port/Outlet Naming

For convenience – especially in large installations with many devices, ports
and outlets – administrators and users with port configuration permission, can
give each port or outlet a name. To assign, modify or delete a name, do the
following:
1. Click once on the item you want to edit; wait a second; then click again.
Note: 1. This is not a double click. It involves two separate clicks. A
double click will switch you to the device attached to the port.
2. In the AP GUI version you can right click on the port you want to
edit, then select Rename in the popup box that appears, or you
can highlight the port and press F2.
After a second or two, the field changes to provide a text input box:
2. Key in a name for the item (or change/delete a previous one).
 You can use any combination of letters, numbers, and symbols on the
typewriter keys of keyboards with PC US English layout. In this case,
the maximum number of characters allowed is 20.
 You can also activate your local IME to input non-English characters.
For languages that use 2 byte encoding, the maximum number of
characters allowed is 9.
108