ATEN KN2116VA User Manual page 105

2. Open an Explorer window on the local computer and select the media
source you want to mount, then hold a left-click with the mouse to drag
and drop the virtual media source to the remote view window, as shown
below:
 Drag and Drop = Virtual Media Read only
 Drag and Drop + [Ctrl] = Virtual Media Read + Write
See Virtual Media Support, page 294 for a list of supported virtual media
types, and details about mounting them.
3. While the virtual media drive mounts a message will appear on the remote
view screen, as shown here:
Chapter 5. The User Interface
(Continues on next page.)
89