Yamaha PSR-S975 Reference Manual page 50

[1 ]
[2 ]
[3 ]
[4 ]
[5 ]
3
[6 ]
[7 ]
[8 ]
Pressing the [8 ] (SET UP) button calls up the detailed setting display. You can set the
view type by using the [1 ]–[6 ] buttons, then press the [8 ] (OK) button.
[1 ]
[2 ]
50
PSR-S975/S775 Reference Manual
LEFT ON/ Enables/disables display of the left-hand notation. Depending on other settings,
OFF this parameter may be unavailable and may appear grayed out. If this is the case,
go to the detailed setting display (see below) and set the LEFT CH parameter to
any channel except "AUTO." Or, go to the display [FUNCTION] → TAB [E]
MENU 1 → [H] SONG SETTING → TAB [E] GUIDE/CHANNEL and set the
TRACK 2 parameter to any channel except "OFF"
eter) and LEFT cannot be turned off at the same time.
RIGHT ON/ Enables/disables display of the right-hand notation. RIGHT and LEFT (above)
OFF cannot be turned off at the same time.
CHORD ON/ Enables/disables display of the chords. If the selected Song does not contain chord
OFF data, chords are not displayed.
LYRICS ON/ Enables/disables display of the lyrics. If the selected Song does not contain lyric
OFF data, lyrics are not displayed. When the Song contains Pedal events, pressing these
buttons can display the Pedal events, instead of displaying Lyrics.
NOTE ON/ Enables/disables display of the note name (pitch). The note name is indicated at the
OFF left of the note. When the space between the notes is too small, the indication may
be moved to the top left of the note. When the Song contains Fingering events,
pressing these buttons can display the fingering, instead of displaying note names.
COLOR ON/ When this is set to ON, the notes in the display appear in color (C: red, D: yellow,
OFF E: green, F: orange, G: blue, A: purple, and B: gray).
SIZE Determines the display zoom level of the notation.
SET UP Calls up the detailed setting display. See below.
LEFT CH Determines which MIDI channel in the Song data is used for the left-hand/right-
hand part. This setting returns to AUTO when a different Song is selected.
RIGHT CH
AUTO: The MIDI channels in the Song data for the right- and left-hand parts are
assigned automatically—setting the parts to the same channel as the channel
which is specified in the [FUNCTION] → TAB [E] MENU 1 → [H] SONG
SETTING → TAB [E] GUIDE/CHANNEL
1–16: Assigns the specified MIDI channel (1–16) to each of the left- and right-
hand parts.
OFF (Available setting only for LEFT CH): Assigns no channel to the left-
hand part. This disables display of the left-hand key range.
(page 54). RIGHT (next param-
(page 54).