Config 1; Config 2 - Yamaha PSR-S975 Reference Manual

2 Metronome
[2 ]
VOLUME
[3 ]–
SOUND
[5 ]
[6 ]/
TIME SIGNA-
[7 ]
TURE
3 Tap
This allows you to set the percussion sound and the velocity which sounds when the [TAP TEMPO] button
is tapped.
[2 ]–
PERCUSSION
[4 ]
[5 ]/
VELOCITY
[6 ]
4 Auto Power Off
For details, refer to "Setting Up" in the Owner's Manual.

CONFIG 2

Use the [A]/[B] buttons to
select the desired parameter.
1 Speaker / Display Content
(PSR-S975)
SPEAKER
[3 ]/
[4 ]
(PSR-S775)
[4 ]/
[5 ]
[5 ]/
DISPLAY OUT
[6 ]
(PSR-S975)
Determines the volume of the metronome sound.
Determines whether a bell accent is sounded or not at the first beat of each
measure.
Determines the time signature of the metronome sound.
Selects the percussion sound.
Sets the velocity.
Determines whether or not the sound is output from the speaker of this
instrument.
HEADPHONE SW: Speaker sounds normally, but is cut off when head-
phones are connected to the [PHONES] jack.
ON: Speaker sound is always on, even if headphones are connected.
OFF: Speaker sound is off. You can only hear the instrument sound via
the headphones or an external device connected to the AUX OUT
jacks.
Selects display contents for the external monitor. For details, refer to the
Owner's Manual, chapter 10.
PSR-S975/S775 Reference Manual
11
129