Wireless Display - Sharp PN-75HC1 Operation Manual

• You can display the image of another device on the same network on this monitor. Connect the monitor (with a wireless
adapter connected) and the device to the access point of the network or wireless router.
You can write/draw letters and lines on the image displayed on this monitor using Note.
• This monitor cannot be used in other than the country or region where you purchased it. The channels and frequencies that
can be used for wireless LAN vary by country and region. Set "Wireless Region" appropriately for your region.
• Software must be downloaded to the other device.
For details, see below.
• The WPS button on the wireless adapter is not used with this monitor.
• Connections to all devices is not guaranteed.
nWireless adapter connection
1. Connect the supplied wireless adapter to the USB port indicated below on the rear of the monitor.
Caution
• When a wireless adapter is connected, please do not connect other USB device to the side USB port. That may cause
malfunctions as the terminals may interfere with each other. Please use the front USB port for connecting other device.
nWireless LAN connection settings
1. Touch or in the side of the screen, and touch
2. Enable Wireless LAN and connect to access point.
nStart EShareServer
1. Touch in the home screen of APPLICATION mode and touch
nDisplay the image that appears on the other device
The following explanation uses Windows (device) as an example.
1. Access the address shown in EShare on the monitor with your browser, and download the software to the other
device whose image is to be displayed.
A warning screen may be displayed, but continue downloading.
2. Install and start the software you downloaded.
3. Check the name of the display shown in EShare on the monitor, select that name on the other device, and select
"Share screen" (Windows) or "Mirroring" (Android).
You can select "Screen Mirror" (Windows) or "TV Mirror" (Android) to display the image that appears on the monitor on the
other device.
4. The other device connects to the monitor, and the image from the other device appears on the monitor.
5. Start Note.
You can draw on the displayed image and save the displayed image.
TIPS
• In Android, audio cannot be sent and touch operation cannot be used.
• Requires wireless LAN access points to connect this monitor and other devices.
30
E

Wireless Display

1
- .
2
.