Wireless Display - Sharp PN-CE701H Operation Manual

• You can display images from other devices on this monitor using wireless LAN.
You can capture the displayed image and set it to the background of a Drawing sheet.
• Software must be downloaded to the other device.
For details, see below.
• Connections to all devices is not guaranteed.
n Wireless adapter connection
1. Connect the supplied wireless adapter to the USB port indicated below on the rear of the monitor.
Caution
• When a wireless adapter is connected, please do not connect other USB device to the side USB port. That may cause
malfunctions as the terminals may interfere with each other. Please use the front USB port for connecting other device.
n Wireless LAN connection settings
1. Swipe from the edge (left or right) of the screen, touch
2. Set Wireless LAN to On.
3. Configure the network connection settings in Wireless Setting.
n Start EShareServer
1. Touch in the home screen of APPLICATION mode.
n Display the image that appears on the other device
The following explanation uses Windows (device) as an example.
1. Access the address shown in EShare on the monitor with your browser, and download the software to the other
device whose screen is to be displayed.
2. Install and start the software you downloaded.
3. Check the name of the display shown in EShare on the monitor, select that name on the other device, and select
"Share screen".
4. The other device connects to the monitor, and the image from the other device appears on the monitor.
5. Drawings are displayed in overlay mode.
You can draw on the displayed image and save the displayed image.
TIPS
• In Android, audio cannot be sent and touch operation cannot be used.

Wireless Display

1
2
in the menu that appears, and touch .
29
E