Note - Sharp PN-75HC1 Operation Manual

Note

Touch or on the side of the screen, and touch
The board is shown as transparent.
Video input from the HDMI terminals/expansion slot cannot be saved.
Only 1 sheet.
• T he drawn lines and the images pasted on the board are handled in the software as an "object".
• Y ou can write/draw letters and lines on the image displayed on this monitor.
nDrawing
1. Draw.
Select such as drawing tool to draw. You can perform the following operations.
Tool
Pen
Mark Pen
Eraser
Object eraser
2. Touch to exit.
TIPS
• When the external input is displayed, the board can not be saved in the USB flash drive connected to the front USB port.
Please insert a USB flash drive in the rear USB port.
If the USB flash drive can not be connected due to interference with the wireless adapter, save it in the internal memory. And
then copy it to the USB flash drive using File Explorer.
in the menu that displays to start.
Used for drawing.
Draw a line. When the Mark Pen is selected, you can draw a line like that of a mark pen. You can
change the settings (line width/color).
The drawn lines are handled in the software as an "object".
You can touch with palm of your hand to automatically change to an eraser.
Erase a drawn line.
The object eraser deletes a touched object. To delete multiple objects, trace over the objects.
You can also delete all objects on a sheet being drawn.
Save a board that is being drawn as an image. The image will be saved in the Note folder. The
maximum size of a saved image is 1920 x 1080.
Exit the application.
(See below.)
Function
E-board / Note
27
E