Sharp PN-75HC1 Operation Manual page 34

Menu Items
Power Save Mode
When Off is selected, Standby state is Networked standby mode. Wake on LAN is enabled. Note, however, that more power
will be consumed in standby state.
When On is selected, Standby state is Standby mode. Wake on LAN is disabled. Note, however, that the startup time from
standby state becomes longer.
Off If No Operation
Determines whether or not to set the monitor to go into standby state when there is no operation by the remote control unit,
touch or RS-232C control.
Off If No Operation-Time
When Off If No Operation is set to On, set the time until standby state is entered.
Reset
Resets the following menus to the factory default settings.
Picture/Sound/Setting/Time
nTime
Menu Time
Set the menu display time.
34
E