Setup Menu; Ecology; Note; Password - Sharp LCD Monitor User Manual

Ecology

When set to "Yes", The monitor activates the
following power saving mode.
• "OPC" set to "On" (Page 33)
• "Standby Mode" set to "Mode2" (Page 38)
• "No Operation Off" set to "3 Hours" (Page 34)
• "Power Management" set to "Mode1" (Page 34)

Note

• Ecology mode cannot be deactivated by selecting "No".
Each setting must be changed individually to deactivate
Ecology mode.
Menu operations

Setup menu

Setup Option

Password

Keylock
Set Inputs
Input Label
Position
Fine Sync
Standby Mode
Auto Restart
RS-232C
DHCP Client
TCP/IP
Status
All Reset
Setting a password
(Password)
If you do not want others to change the setting
for the "Setup" menu, set a password.
1
Select "Password", then press ENTER.
• The screen for entering the password appears.
MENU [Setup---Password]
Enter your new password.
Use 4 digits.
Old Password
New Password
Reconfirm
Press ▲/▼ to set the fi rst digit in "New
2
Password", then press ►.
3
Enter the remaining 3 digits, then press ENTER.
• To return to the previous digit, press ◄.
4
Enter the same password in "Reconfi rm", then
press ENTER.
• The status for "Password" changes to
" (enable)".
Note
• Once the password is set, you must enter the password
to change the "Setup" menu settings.
----
---
----
35