Acer XD1170D Service Manual page 25

No Step
3 Key in Serial 1. Key in the Serial Number
Number
2. In "White Source Select",
(Only for "D" Model.)
3. Check the COM Port is
4. Click "Program".
4 Change Cable "Please change the Cable
to Analog to Analog" message is
shown on the screen, then
click "OK".
Note: "RUN" message will
appear on the screen.
5 Change Cable "Please change the Cable
to Digital to Digital" message is
shown on the screen, then
click "OK".
Note: "RUN" message will
appear on the screen.
6 Finished When the EDID program is
completed, the message,
"OK", will appear on the
screen.
17
Procedure
into the Barcode blank
space.
make a check in "VGA"
and "DVI".
"COM 1".
1
2
3
Photo
4
Chapt er 2