Acer S1213 User Manual
User manual
Hide thumbs
Also See for S1213:
- User manual (62 pages) ,
- Installation manual (18 pages) ,
- Operation manual (9 pages)
Related Manuals for Acer S1213
Summary of Contents for Acer S1213
- Page 1 Acer Projector S1110/T200/XS-S10/S1210/T210/XS- X10/S1210Hn/S1213/T212/XS-X13/ S1213Hn/T212DT/XS-X13HG/ S1310W/T220/XS-W10/S1310WHn/ S1313W/S1313WHn Series User's Guide...
- Page 2 Copyright © 2012. Acer Incorporated. All Rights Reserved. Acer Projector S1110/T200/XS-S10/S1210/T210/XS-X10/S1210Hn/S1213/T212/XS-X13/S1213Hn/ T212DT/XS-X13HG/S1310W/T220/XS-W10/S1310WHn/S1313W/S1313WHn Series User's Guide Original Issue: 4/2012 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications.
- Page 3 Information for Your Safety and Comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
- Page 4 • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.
- Page 5 Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: •...
- Page 6 might cause fire or electric shock. In this case, unplug immediately and contact your dealer. • Do not keep using this product to break or drop it. In this case contact your dealer for inspection. • Do not face the projector lens to the sun. It can lead to fire. •...
- Page 7 Caution for Listening To protect your hearing, follow these instructions. • Increase the volume gradually until you can hear clearly and comfortably. • Do not increase the volume level after your ears have adjusted. • Do not listen to music at high volumes for extended periods. •...
-
Page 8: First Thing First
viii First Thing First Usage Notes • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. -
Page 9: Table Of Contents
Information for Your Safety and Comfort First Thing First viii Usage Notes viii Precautions viii Introduction Product Features Package Overview Projector Overview Projector Outlook Control Panel Remote Control Layout Getting Started Connecting the Projector Turning the Projector On/Off Turning On the Projector Turning Off the Projector Adjusting the Projected Image Adjusting the Height of the Projected Image... - Page 10 Troubleshooting LED & Alarm Definition Listing Replacing the Lamp Ceiling Mount Installation Specifications Compatibility Modes Regulations and safety notices...
-
Page 11: Introduction
• technology • S1110/T200/XS-S10: Native 800 x 600 SVGA resolution Auto / 4:3 / 16:9 aspect ratio supported S1210/T210/XS-X10/S1210Hn/S1213/T212/XS-X13/S1213Hn/T212DT/XS- X13HG: Native 1024 x 768 XGA resolution Auto / 4:3 / 16:9 aspect ratio supported S1310W/T220/XS-W10/S1310WHn/S1313W/S1313WHn: Native 1280 x 800 WXGA resolution Auto/ Full / 4:3 /16:9 / L.Box aspect ratio supported... -
Page 12: Package Overview
Package Overview This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing. Projector with lens cap Power cord VGA cable Acer Projector Security Card Acer Projector This CD contains •... -
Page 13: Projector Overview
5 13 6 RS232 USB B S-VIDEO AUDIO-R AUDIO IN 1 VGA OUT VGA IN 1 AUDIO IN 2 (S1213/T212/XS-X13/ VIDEO AUDIO-L AUDIO VGA IN 2 S1213 S1313W) Description Description USB connector Tilt adjusting wheel Monitor loop-through output connector 9 Kensington™... -
Page 14: Control Panel
Control Panel Function Description LAMP Lamp Indicator LED Power key and Power Refer to the "Turning the Projector On/ indicator LED Off" section. Keystone Adjusts image distortion caused by tilting projection (±40 degrees). MENU • Launches the Onscreen Display (OSD) menu, returns to the previous step for the OSD menu operation or exits the OSD menu. -
Page 15: Remote Control Layout
Remote Control Layout ENTER BACK PgUp PgDn SD/USB A HDMI/DVI LAN/WiFi USBB Function Description POWER Refer to the "Turning the Projector On/Off" section. ASPECT RATIO To choose the desired aspect ratio. ZOOM Zooms the projector display in or out. RESYNC Automatically synchronizes the projector to the input source. - Page 16 Function Description 13 FREEZE To pause the screen image. 14 HIDE Press "HIDE" to hide screen image; press again to display the image. 15 SOURCE Chooses RGB, component video, S-Video, composite video or HDTV source. 16 MENU • Launches the Onscreen Display (OSD) menu, returns to the previous step for the OSD menu operation or exits the OSD menu.
-
Page 17: Getting Started
Getting Started Connecting the Projector • S1110/T200/XS-S10/S1210/T210/XS-X10/S1310W/T220/XS-W10 DVD player, Set-top box, Video/S-Video HDTV receiver Output D-Sub RS232 Display R B G R B G D-Sub RS232 Speakers HDTV adapter D-Sub RS232 D-Sub Description Description Power cord S-Video cable VGA cable RS232 cable VGA to component video/HDTV USB cable... - Page 18 • S1210Hn/S1213/T212/XS-X13/S1213Hn/T212DT/XS-X13HG/S1313W/ S1310WHn/S1313WHn DVD player, Set-top box, HDTV receiver D-Sub Video/S- RS232 Display Video Output R B G Speakers RS232 D-Sub R B G HDTV adapter D-Sub RS232 D-Sub RS232 USB B HDMI S-VIDEO AUDIO-R AUDIO IN 1 VGA OUT...
-
Page 19: Turning The Projector On/Off
Turning the Projector On/Off Turning On the Projector Remove the lens cap. Ensure that the power cord and signal cable are securely connected. The Power LED will light red. Turn on the projector by pressing (POWER) on the control panel or remote control, and the Power indicator LED will turn blue. -
Page 20: Turning Off The Projector
Turning Off the Projector To turn the projector off, press the power button. This message appears: "Please press the power button again to complete the shutdown process." Press the power button again. The LED power indicator will turn solid red to indicate standby mode. It is now safe to unplug the power cord. -
Page 21: Adjusting The Projected Image
Adjusting the Projected Image Adjusting the Height of the Projected Image The projector is equipped with an elevator foot for adjusting the image height. To raise the image: Press the elevator button. Raise the image to the desired height angle, then release the button to lock the elevator foot into position. -
Page 22: How To Optimize Image Size And Distance
Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. • S1110/T200/XS-S10/S1210/T210/XS-X10/S1210Hn/S1213/T212/XS-X13/ S1213Hn/T212DT/XS-X13HG If the projector is 1 m from the screen, good image quality is possible for image sizes around 81". - Page 23 • S1310W/T220/XS-W10/S1310WHn/S1313W/S1313WHn If the projector is 4 m from the screen, good image quality is possible for image sizes around 379". Note: Remind as below figure, the space of 510 cm height is required when located at 2 m distance. 379"...
-
Page 24: How To Get A Preferred Image Size By Adjusting Distance And Zoom
The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. • S1110/T200/XS-S10/S1210/T210/XS-X10/S1210Hn/S1213/T212/XS-X13/ S1213Hn/T212DT/XS-X13HG To obtain an image size of 50" set the projector at a distance 0.6 m from the screen. - Page 25 • S1310W/T220/XS-W10/S1310WHn/S1313W/S1313WHn To obtain an image size of 50" set the projector at a distance 0.5 m from the screen. 50" Desired image size Height: 74 cm From base to top of image B&C 0.5 m Desired distance Desired Image Size Distance (m) Top (cm) Diagonal (inch)
-
Page 26: User Controls
(POWER) on the control panel or remote control. Press "MENU" on the control panel or remote control to launch the OSD for projector installation and maintenance. (S1110/T200/XS-S10/S1210/T210/XS- X10/S1213/T212/XS-X13/S1310W/ T220/XS-W10/S1313W) (S1210Hn/S1213Hn/T212DT/ XS-X13HG/S1310WHn S1313WHn) The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more. -
Page 27: Acer Empowering Technology
Acer Empowering Technology Empowering Key Acer Empowering Key provides three Acer unique functions: "Acer eView Management", "Acer eTimer Management", and "Acer ePower Management". Press " " for more than one second to launch the Onscreen Display main menu to modify its function. -
Page 28: Onscreen Display (Osd) Menus
Onscreen Display (OSD) Menus The projector has multilingual Onscreen Display (OSD) menus that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the control panel or remote control. -
Page 29: Color
Color (S1213/T212/XS-X13/S1213Hn/ (S1110/T200/XS-S10/S1210/T210/ T212DT/XS-X13HG/S1313W/ XS-X10/S1210Hn/S1310W/T220/ S1313WHn) XS-W10/S1310WHn) There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Presentation: For meeting presentation with higher brightness. • Standard: For common environment. Display Mode • Video: For playing video in a bright environment. - Page 30 Press to increase the amount of red in the image. Dynamic Black If turned on, the projector dynamically adjusts the power (S1213/T212/XS- consumption of the lamp according to the brightness of X13/S1213Hn/ the image being projected. When projecting darker T212DT/XS-...
-
Page 31: Image
Image • Front-Desktop: The factory default setting. • Front-Ceiling: When you select this function, the projector inverts the image for ceiling-mounted projection. • Rear-Desktop: When you select this function, the Projection projector reverses the image so that you can project behind a translucent screen. - Page 32 Adjusts the sharpness of the image. • Press to decrease the sharpness. Sharpness • Press to increase the sharpness. H. Position • Press to move the image left. (Horizontal • Position) Press to move the image right. V. Position • Press to move the image down.
- Page 33 Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under video mode. Note: "Sharpness" function is not supported under computer mode. Note: Supported 3D signal timings: Signal source type Supported timing 640 x 480@100Hz, 640 x 480@120Hz, 800 x 600@100Hz, 800 x 600@120Hz, HDMI (for S1210Hn/S1213Hn/ 1024 x 768@100Hz, 1024 x 768@120Hz...
-
Page 34: Setting
Setting (S1110/T200/XS-S10/S1210/T210/ XS-X10/S1213/T212/XS-X13/ (S1210Hn/S1213Hn/T212DT/XS- S1310W/T220/XS-W10/S1313W) X13HG/S1310WHn/S1313WHn) Menu Location Chooses the OSD menu location on the display screen. Adjusts the color range of the HDMI image data to prevent HDMI Color color display error. Range • Auto: Automatically adjusts the color range by (S1210Hn/ information from the player. - Page 35 Security This projector provides a useful security function for the administrator to manage the projector. Press to change the "Security" setting. If the security function is enabled, your must enter "Administrator Security Password" first before changing the security setting. The factory default of "Administrator Password" is "1234".
- Page 36 Administrator Password You can enter "Administrator Password" when the "Enter Administrator Password" or "Enter Password" dialogue box displays. • Press to change "Administrator Password". • The factory default of "Administrator Password" is "1234". If you forget your administrator password, do the following to retrieve the administrator password: •...
- Page 37 To connect your projector to the network: Take a RJ45 cable and connect one end to the LAN input jack of the projector and the other end to the RJ45 port. Enter the LAN Setting menu. The "Enter Administrator Password" dialogue box is displayed. Enter "Administrator Password".
- Page 38 Note: "HDMI Color Range" is only available when the input signal is HDMI. About LAN Setting (for S1210Hn/S1213Hn/T212DT/XS-X13HG/S1310WHn/ S1313WHn) Note 1 : An overview of the remote network operation page See Note 2 and Note 3. To switch These buttons input signals, function the click your...
- Page 39 Management Choose "On" to dim the projector lamp, which will also ECO Mode lower the power consumption, reduce noise, and extend the lamp life. Choose "Off" to return to the normal mode. Choose "On" to turn on the High Altitude mode. When this function is turned on, the projector fans operate at full High Altitude speed continuously to cool down the projector’s...
-
Page 40: Timer
Audio • Press to decrease the volume. Volume • Press to increase the volume. • Choose "On" to turn mute on. Mute • Choose "Off" to turn mute off. Timer Timer Location Sets the location of the timer on the screen. Timer Start (or Press to start or stop the timer. - Page 41 Language Sets a language for the OSD menus. Use select your preferred language. Language • Press to confirm the selection.
-
Page 42: Appendices
Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions Problem Solution No image appears • Make sure all the cables are correctly connected as onscreen described in the "Getting Started"... - Page 43 • Make sure the projection screen is within the required distance: S1110/T200/XS-S10/S1210/T210/XS-X10/S1210Hn/ S1213/T212/XS-X13/S1213Hn/T212DT/XS-X13HG: 1.32 to 12 feet (0.4 to 3.7 meters) S1310W/T220/XS-W10/S1310WHn/S1313W/ S1313WHn: 0.98 to 10.5 feet (0.3 to 3.2 meters) Refer to the "How to Get a Preferred Image Size by Adjusting Distance and Zoom"...
-
Page 44: Problems With The Projector
Image is stretched When you play a DVD encoded in anamorphic or 16:9 when displaying a aspect ratio you may need to adjust the following "widescreen" settings: DVD title • If you play a 4:3 format DVD title, please change the format to 4:3 with the projector OSD. -
Page 45: Osd Messages
OSD Messages Condition Message Reminder Message Fan Fail - the system fan is not working. Fan Fail. Lamp will automatically turn off soon. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used. Please also check the dust filters if they are installed. - Page 46 LED & Alarm Definition Listing LED Messages Message Power LED LAMP LED TEMP LED Blue Standby (Power cord plugged in) Power on Lamp retry Quick flashing Turning off (Cooling Quick flashing state) Turning off (Cooling completed) Error (Thermal failure) Error (Fan lock failure) Quick flashing Error (Lamp breakdown)
-
Page 47: Replacing The Lamp
Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life itself. It will show you a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!"... -
Page 48: Ceiling Mount Installation
Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling. - Page 49 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Screw Type B Large Washer Projector Bracket Supports projector and allows for adjustments Spacer - For heat dissipation Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution.
- Page 50 3 mm diameter screws are enclosed in the screw pack. Models Screw Type B Washer Type Diameter (mm) Length (mm) Large Small S1110/T200/XS-S10/ S1210/T210/XS-X10/ S1210Hn/S1213/T212/XS- X13/S1213Hn/T212DT/ XS-X13HG/S1310W/T220/ XS-W10/S1310WHn/ S1313W/S1313WHn 149.90 mm 83.27 mm 12.11 mm...
-
Page 51: Compatibility Modes
Resolution • S1110/T200/XS-S10: Native: SVGA (800 x 600) Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080) • S1210/T210/XS-X10/S1210Hn/S1213/T212/XS-X13/ S1213Hn/T212DT/XS-X13HG: Native: XGA (1024 x 768) Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080) • S1310W/T220/XS-W10/S1310WHn/S1313W/S1313WHn: Native: WXGA (1280 x 800) - Page 52 3.5 mm audio jack output x 1 • VGA output x 1 • USB x 1 (Type mini B) Below items are for S1213/T212/XS-X13/S1313W only. • 3.5 mm audio jack input x 2 • Audio input (R/L) x 1 Below items are for S1210Hn/S1213Hn/T212DT/XS- X13HG/S1310WHn/S1313WHn only.
-
Page 53: Compatibility Modes
Compatibility Modes VGA Analog - PC Signal H.Frequency Mode Resolution V.Frequency [Hz] [KHz] VGA_60 59.94 31.469 VGA_72 72.809 37.861 VGA_75 640 x 480 37.5 VGA_85 85.008 43.269 VGA_120 119.518 61.91 SVGA_56 56.25 35.156 SVGA_60 60.317 37.879 SVGA_72 72.188 48.077 800 x 600 SVGA_75 46.875 SVGA_85... - Page 54 WXGA_60 59.87 47.776 WXGA_75 1280 x 768 74.893 60.289 WXGA_85 84.837 68.633 WXGA_60 1280 x 720 WXGA_60 1280 x 800 59.81 49.702 WXGA+_60 1440 x 900 59.887 55.935 1680x1050_60 1680 x 1050 59.954 65.29 1920x1080-RB 1920 x1080 66.6 1920x1080-EIA 1920 x1080 67.5 acer_16:9 1366 x 768...
- Page 55 UXGA_60 1600 x 1200 Mac G4 640 x 480@60Hz 59.94 31.469 MAC13 640 x 480@67Hz 66.667 Mac G4 800 x 600@60Hz 60.317 37.879 Mac G4 1024 x 768@60Hz 60.004 48.363 MAC19 1024 x 768@75Hz 75.02 60.241 MAC21 1152 x 870@75Hz 75.061 68.681 WXGA_60...
- Page 56 720 x 576 576p 50.00 31.25 1280 x 720 720p 60.00 45.00 1280 x 720 720p 50.00 37.50 1920 x 1080 1080i 60.00 33.75 1920 x 1080 1080i 50.00 28.13 1920 x 1080 1080p 60.00 67.5 1920 x 1080 1080p 50.00 56.26 1920 x 1080...
-
Page 57: Regulations And Safety Notices
Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 58: Declaration Of Conformity For Eu Countries
Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby, declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification Radio device regulatory notice Note: The regulatory information below is for models with... - Page 59 List of applicable countries This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact a local office in the country of use. Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.
-
Page 60: Declaration Of Conformity
QSV1101/QNX1102/QNX1105/QWX1103 series Machine Type: S1110/T200/XS-S10/S1210/T210/XS-X10/S1210Hn/ S1213/T212/XS-X13/S1213Hn/T212DT/XS-X13HG/ S1310W/T220/XS-W10/S1310WHn/S1313W/S1313WHn series Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all the necessary steps have been taken and are in force to assure that production units of the same product will continue comply with the requirements. - Page 61 Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan The standards listed below are applied to the product if built with WLAN module or wireless keyboard and mouse. R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard: •...
- Page 62 The following local Manufacturer / Importer is responsible for this declaration: Product: DLP Projector Model Number: QSV1101/QNX1102/QNX1105/ QWX1103 series Machine Type: S1110/T200/XS-S10/ S1210/T210/XS-X10/S1210Hn S1213/T212/XS-X13 S1213Hn/T212DT/XS-X13HG/ S1310W/T220/XS-W10/S1310WHn/ S1313W/S1313WHn series Name of Responsible Party: Acer America Corporation Address of Responsible Party: 333 West San Carlos St. San Jose, CA 95110 U.