Voice Command - Navman MY Series User Manual

2. From the My Navman panel, select the checkbox next to the map you want to remove.
3. Click Remove Maps to remove the selected maps.
4. Confirm that you want to remove the selected map when prompted. The map is
removed from your Navman. You can reinstall these maps at any time via NavDesk.

Voice Command

NavDesk  VOICE COMMAND
Depending on your Navman model, you may be able to set the destination quickly by using
Voice Command. NavDesk's Voice Command allows you to install or remove voice files on
your Navman.
Note: You can download and install free Voice Command updates when available. For more
information on downloading the updates, refer to the "How do I update my Navman?" section.
1. Open NavDesk, and then click VOICE COMMAND.
2. Complete the following:
If you want to...
install a voice command file,
remove a voice command file,
Then...
from the Loadable files section, select a file source and
then click Open.
In the Available voice command files section, select the
desired voice command file and click Install selected
files.
in the Installed voice command files section, select the
voice file you would like to remove and click Remove
selected files.
71