Navman MY Series User Manual page 65

If you want to...
restore factory default settings,
reset the GPS,
record a GPS log of your trip,
Demo
If you want to...
enable a shop demonstration of the
navigation feature to be played,
enable the screen saver feature on your
Navman,
Help
If you want to...
view the tutorial,
know how to update the software and
maps of your Navman,
view copyright and trademark information, tap About.
64
Then...
tap Restore factory defaults. When the warning
dialog box displays, tap Yes. Your Navman will restart.
This option allows you to restore default factory
settings; the recent locations and saved My Places
destinations on the device will be deleted.
tap Reset GPS. When the warning dialog box
displays, tap Yes.
Note: Occasionally, the GPS fix may need to be reset. This
may occur if the receiver has been transported a long distance
since last being used; for example, to a different country, and
is still trying to establish the previous position.
tap GPS logging to turn it on.
Then...
select a demonstration country from the list and tap
Start.Tap OK. Your Navman will restart.
When your Navman is in Shop demo mode, you will
see the navigation demonstration of the pre-defined
route without having to set a destination.
Note: You cannot operate your Navman properly in Shop
demo mode.
tap Screen Saver Video.
When your Navman is idle for 10/30/60 minutes, the
screen saver will display.
Then...
tap View Tutorial. To display the tutorial on each
start-up, select the Show tutorial on start-up
option on the initial screen of tutorial.
tap Update software and maps to view the update
instructions.