Receiving; Nameplate - YASKAWA CDBR Series Installation Manual

1 RECEIVING

• Do not install and attempt to use a braking resistor or braking resis-
tor unit If there are any damaged or missing components.
Failure to comply can result in personal injury.
The braking resistor unit and braking unit have been put through severe tests at
the factory before shipment. After unpacking, however, check and see the follow-
ing. If any malfunctions are found, contact your YASKAWA representative.
• Their nameplate data meet your requirements.
• They have sustained no damage while in transit.
• Fastening bolts and screws are not loose.
For long term storage, the unit should be kept in a clean area
NOTE NOTE
indoors.

1.1 NAMEPLATE

(1) NAMEPLATE INFORMATION (BRAKING UNIT)
Braking Unit
Model Number
(2) NAMEPLATE INFORMATION (BRAKING RESISTER UNIT)
Braking Resistor
Unit Model Number
CAUTION
15
1 RECEIVING
Design
Revision
Order