Table of Contents
Advertisement
Chapter 5
4
The
PIN
code is needed when registering your cordless phone. The default is 0000.
Change it by entering a new one.
5
Reduce DECT field strength:
base transmit power will be decreased. Then the DECT Handset will have signal
within a small distance.
6
Eco DECT:
Only when all handsets support Eco Mode, will it take effect. In this
mode, if all the handsets standby for more than one minutes, DECT Base and
DECT Handsets would be in Eco Mode and do not emit any signal. It will wake up
automatically when there is a call.
7
Security:
Check the box if you want the DECT/CAT-iq encrypt security to take effect.
8
Click
Save
to make the settings effective.
5 3
Entering Telephone Information
Before using telephony services, you should first enter your telephone information
provided by your telephony service provider.
Follow the steps below to enter information:
1
Visit http://tplinkmodem.net, and log in with the password you set for the router.
2
Go to
Advanced
3
Click
Add
and you will see the following screen.
Check the box to enable this function. In this mode,
>
VoIP
>
Telephone Numbers
to open the configuration page.
Telephony
21
Advertisement
Table of Contents
