Connecting The Telephone; Entering Telephone Information - TP-Link Archer XR500v User Manual

Chapter 5
5 1

Connecting the Telephone

Connect your telephone to the RJ11 ports on the back panel. Please note that you can
only connect to two ports (one to a Phone 1 and the other to a Phone 2) at most.
5 2

Entering Telephone Information

Before using telephony services, you should first enter your telephone information
provided by your telephony service provider.
Follow the steps below to enter information:
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2 Go to Advanced >
Click Add and you will see the following screen.
3 Enter the necessary information as required, and click
effective.
Phone Number: The number you use to dial and answer.
Registrar Address: Usually a domain name, if not, an IP address.
Authentication ID and
Advanced: Click to have more configuration.
To have more configuration on telephony settings
Click Advanced under
Telephony > Telephone Numbers
Password: Not necessary information, but if you have, fill them in.
Advanced Settings to configure more telephony settings.
to open the configuration page.
Save to make the settings
VoIP
17