Table of Contents
Advertisement
10. ASSEMBLY HINTS
1) Start to assemble the DISPLAY on the bottom side
of the TOUCH WINDOW.
3) When assembling the CAMERA KEY hold it as
shown and insert the shown pin in its place.
5) Flip the ENGINE BOARD over on top of the TOUCH
WINDOW and push it down slightly until it snaps.
Then attach the TOUCH WINDOW connector.
18
2) Use the tweezers to connect the ENGINE BOARD to
the DISPLAY. Be careful not to damage the connector
or any nearby components.
4) Then rotate the CAMERA KEY counterclockwise and
attach the two shown clips.
6) Use the tweezers to position the LOCK KEY from
the left side. Slightly push the TOUCH WINDOW and
the C-COVER together to have the LOCK KEY in place.
Conf idential | Copyright © 2011 Nokia | A ll rights reserved
Nokia 600
RM-701
Service Manual Level 1&2
Version 1.0
Advertisement
Table of Contents
