Entering Setup
To enter Setup, press the key
NOTE: You must press
The Setup Utility main menu then appears:
The above screen is the BIOS Utility Basic Level screen. It allows you to view and change only the basic
configuration of your system.
The command line at the bottom of the menu tells you how to move within a screen and from one screen to
another.
To select an option, move the highlight bar by pressing
!
To change a parameter setting, press
!
e
to pop out the screen with available items for selection.
^
Press
!
exit Setup.
The parameters on the screens show default values. These values may not be the same as those in your
system.
The grayed items on the screens have fixed settings and are not user-configurable.
Parameter
Product Information
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
25
c
during the POST (Power-on self-test).
c
simultaneously while the system is booting.
to return to the main menu. If you are already in the main menu, press
Introduce the basic system information
The basis system configuration can be set up through this menu.
The advanced system feature can be set up through this menu.
All onboard peripherals can be set up through this menu.
w
y
,
{
}
or
until the desired setting is found, or press
Description
z
x
,
, or
, then press
^
e
.
again to
Chapter 2