Entering Setup - Acer Veriton FP2 Service Manual

Entering Setup

To enter Setup, press the key combination
NOTE: You must press
The Setup Utility main menu then appears:
The system supports two BIOS Utility levels: Basic and Advanced. The above screen is the BIOS Utility Basic
Level screen. It allows you to view and change only the basic configuration of your system.
If you are an advanced user, you may want to check the detailed configuration of your system. Detailed
system configurations are contained in the Advanced Level. To view the Advanced Level menu, press F8 or
the Alt + F4 keys simultaneously.
NOTE: The F8 and Alt + F4 keys work only when you are in the main menu. This means that you can activate
the advanced level and hidden information only when you are in the main menu.
The following screen shows the Advanced Level main menu:
The command line at the bottom of the menu tells you how to move within a screen and from one screen to
another.
To select an option, move the highlight bar by pressing
!
Press
!
To change a parameter setting, press
!
Press
!
exit Setup.
The parameters on the screens show default values. These values may not be the same as those in your
system.
The grayed items on the screens are fixed settings and not user-configurable.
22
simultaneously while the system is booting.
Setup Utility
!
System Information
!
Product Information
!
Disk Drives
!
Onboard Peripherals
!
Power Management
!
Boot Options
!
Date and Time
!
System Security
!
Advanced Options
Load Default Settings
Abort Settings Change
to move to the next page or
to return to the main menu. If you are already in the main menu, press
.
or then press
to return to the previous page.
or until the desired setting is found.
.
again to
Chapter 2