Standard Disassembly Procedure - Acer Veriton 3700G Service Manual

Standard Disassembly Procedure

This section tells you how to disassemble the system when you need to perform system service. Please also
refer to the disassembly video, if available.
CAUTION: Before you proceed, make sure you have turned off the system and all peripherals connected to it.
Opening the System
1. Turn off the system power and unplug all cables.
2. Remove the two screws holding the upper cover
3. Slide the side doors out. Then remove it.
Removing the Front Panel
1. Remove the front panel as the picture shows carefully..
Removing the ODD/FDD/SATA HDD
1. Disconnect the ODD power cables and ODD cables from the ODD.
2. Disconnect the FDD power cable and FDD cable from the FDD.
68