Table of Contents
Advertisement
VFP function
— Adjusting the picture quality
The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programming,
picture tone or personal preference.
NOTE:
Before you start operation;
The VFP setting screen disappears if no operations are done for
more than about 10 seconds. If the setting screen disappears
before you finish, start from step 1 again.
1
Access the VFP setting menu.
Press DVD PICTURE during
playback.
● The current setting appears on
the TV screen.
2
Select the VFP mode.
Press w e repeatedly.
● Each time you press w e, the VFP mode changes as follows:
NORMAL]CINEMA]USER 1]USER 2](Back to the
beginning)
NORMAL
:
Select this normally.
CINEMA
:
Suitable for movie.
USER 1
USER 2
/
:
You can adjust parameters that affect
picture appearance and store settings. Go
to step 3.
NOTE:
You cannot adjust the parameters of "NORMAL" and
"CINEMA".
To adjust picture appearance manually
3
Access USER menu.
Press w e repeatedly to
select "USER 1" or "USER 2".
4
Select the parameter.
Press rt repeatedly to select a parameter you want to
adjust, then press ENTER.
● Adjust gradually and confirm picture appearance results are as
preferred.
GAMMA
(–3 to +3)
BRIGHTNESS
(–8 to +8)
CONTRAST
(–7 to +7)
SATURATION
(–7 to +7)
TINT
:
(–7 to +7)
SHARPNESS
NORMAL
0
GAMMA
(–8 to +8)
BRIGHTNESS
0
0
CONTRAST
0
SATURATION
● VFP menu disappears and the following pop-up window
TINT
0
0
appears on the TV screen.
SHARPNESS
● The selection menu disappears automatically if you do not
change the selection for 10 seconds.
5
Adjust the parameter.
Press rt repeatedly to change the setting, then press
ENTER.
● The current VFP settings appear again.
6
Adjust the other parameters.
Repeat steps 4 and 5 to adjust other parameters.
To return to the normal screen
Press DVD PICTURE.
To activate your setting
Press DVD PICTURE, then press w e repeatedly to select
"USER 1" or "USER 2" that you have changed the
parameters.
USER 1
0
GAMMA
BRIGHTNESS
0
0
CONTRAST
SATURATION
0
0
TINT
0
SHARPNESS
:
Controls brightness of neutral tints while
maintaining brightness of dark and bright
portions.
:
Controls screen brightness.
:
Controls screen contrast.
:
Controls screen color depth.
Controls screen tint.
:
Controls screen sharpness.
GAMMA
GAMMA
0
45
EN
0
Advertisement
Table of Contents
