Cleaning The Door Glazing - Smeg Classica Aesthetic SFPR9395X Manual

2. Grasp the door on both sides with both
hands, raise it so that it forms an angle of
around 30° and remove it.
3. To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that grooved sections A are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.

4.4 Cleaning the door glazing

The glass in the door should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
We recommend the use of
cleaning products distributed by
the manufacturer.
124
Cleaning and maintenance
Removing the internal glass panels
For easier cleaning, the internal glass
panels of the door can be removed.
1. Remove the door from the appliance or
lock it in position using the special pins.
2. Remove the internal glass panel by
pulling the rear part gently upwards, in
the direction of movement indicated by
the arrows.
3. Then remove the internal glass panel
from the front profile.