Advertisement
Finished Wall
400
INSTALLATION
TO REMOVE EXISTING TOILET
Turn off the water supply. Flush the toilet, and use a sponge
to remove the remaining water from the tank and bowl.
Disconnect the supply shut-off valve (if present), and remove
the old tank and bowl.
Remove the old gasket from the floor
and the closet flange with a putty knife.
Remove the old T-bolts and discard
them.
NOTICE:
if the new toilet is not
installed immediately, temporarily stuff
a rag into the closet flange.
NOTICE: Do not use white cement or high lime content
cements to install this toilet. The expansion of cement due to
a rise in temperature may make the toilet crack or cause
damage. Kohler is not responsible for any damage caused by
installation with the use of cement.
1278901-T01-B
736
390
C
L
OF OUTLET
Kohler reserves the right to change marked dimensions without prior notice.
K-18728T-TPF
Supply
624
160
260
Fig.#1
1
Fig.#2
Closet Flange
2
-3-
FRONT OF BOWL
521
(
)
380
T
Advertisement
