Table of Contents
Advertisement
Table 11 Network Setting > Broadband > Cellular Backup (continued)
LABEL
DESCRIPTION
Obtain an IP
Select this option if your ISP did not assign you a fixed IP address.
Address
Automatically
Use the
Select this option if the ISP assigned a fixed IP address.
following static
IP address
IP Address
Enter your WAN IP address in this field if you selected Use the following static IP address.
Subnet Mask Enter the subnet mask of the IP address.
Obtain DNS info
Select this to have the VMG get the DNS server addresses from the ISP automatically.
dynamically
Use the
Select this to have the VMG use the DNS server addresses you configure manually.
following static
DNS IP address
Primary DNS
Enter the first DNS server address assigned by the ISP.
server
Secondary
Enter the second DNS server address assigned by the ISP.
DNS server
Enable Email
Select this to enable the e-mail notification function. The VMG will e-mail you a notification when
Notification
the cellular connection is up.
Mail Account
Select an e-mail address you have configured in Maintenance > Email Notification. The VMG
uses the corresponding mail server to send notifications.
You must have configured a mail server already in the Maintenance > Email Notification screen.
Cellular backup
Type a title that you want to be in the subject line of the e-mail notifications that the VMG sends.
Email Title
Send
Notifications are sent to the e-mail address specified in this field. If this field is left blank,
Notification to
notifications cannot be sent via e-mail.
Email
Advanced
Click this to show the advanced cellular backup settings.
Budget Setup
Enable Budget
Select Enable to set a monthly limit for the user account of the installed cellular card. You can set
Control
a limit on the total traffic and/or call time. The VMG takes the actions you specified when a limit
is exceeded during the month.
Time Budget
Select this and specify the amount of time (in hours) that the cellular connection can be used
within one month. If you change the value after you configure and enable budget control, the
VMG resets the statistics.
Data Budget
Select this and specify how much downstream and/or upstream data (in Mega bytes) can be
(Mbytes)
transmitted via the cellular connection within one month.
Select Download/Upload to set a limit on the total traffic in both directions.
Select Download to set a limit on the downstream traffic (from the ISP to the VMG).
Select Upload to set a limit on the upstream traffic (from the VMG to the ISP).
If you change the value after you configure and enable budget control, the VMG resets the
statistics.
Chapter 6 Broadband
VMG3925-B10C/B30C User's Guide
90
Advertisement
Table of Contents
