Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 104 System Monitor > Routing Table
LABEL
DESCRIPTION
IPv4/IPv6 Routing Table
Destination
This indicates the destination IPv4 address or IPv6 address and prefix of this route.
Gateway
This indicates the IPv4 address or IPv6 address of the gateway that helps forward this route's
traffic.
Subnet Mask
This indicates the destination subnet mask of the IPv4 route.
Flag
This indicates the route status.
U-Up: The route is up.
!-Reject: The route is blocked and will force a route lookup to fail.
G-Gateway: The route uses a gateway to forward traffic.
H-Host: The target of the route is a host.
R-Reinstate: The route is reinstated for dynamic routing.
D-Dynamic (redirect): The route is dynamically installed by a routing daemon or redirect.
M-Modified (redirect): The route is modified from a routing daemon or redirect.
Metric
The metric represents the "cost of transmission". A router determines the best route for
transmission by choosing a path with the lowest "cost". The smaller the number, the lower the
"cost".
Interface
This indicates the name of the interface through which the route is forwarded.
brx indicates a LAN interface where x can be 0~3 to represent LAN1 to LAN4 respectively.
ptm0 indicates a WAN interface using IPoE or in bridge mode.
ppp0 indicates a WAN interface using PPPoE.
Chapter 25 Routing Table
VMG3925-B10C/B30C User's Guide
243
Advertisement
Table of Contents
