LG PM6900-DD Owner's Manual page 36

34
PENTOUCH
Pairing for the First Time
1
Place the pen within 10 cm from the LG logo
at the bottom of the TV.
2
Press the
(POWER)
once.
3
The LED indicator on the touch pen will red
for 2 seconds and blinks green 3 times when
pairing is complete.
4
If the LED indicator is red for 4 - 5 seconds and
blinks red 3 times, pairing is not successful.
Please try pairing again.
5
Once a pen is paired, the red LED blinks once
when you press the Touch Home button.
Unpairing (Resetting the touch pen)
1
Press the Touch Home button on the touch
pen and check that the red LED blinks once.
2
Press the Touch Home button and the
button together, regardless of
(POWER)
sequence, for more than 4 seconds.
3
If you release the buttons after 4 seconds, the
pen will be reset. The red LED will blink three
times and the pen will be turned off.
button on the touch pen
Caution When Unpairing
1
Be careful not to unpair the pen by mistake. If
unpaired, try pairing it again.
2
If you unpair and pair a normally functioning
touch pen, the other paired pen may not work.
In this case, unpair the nonfunctioning touch
pen and pair it again by following the steps
described in the Pairing for the First Time
section.
Touch pen Operation
Once paired, you can use the touch pen in the
following ways.
1
Powering on
- Press the
(POWER)
and green LEDs will remain lit to indicate that
the power is on.
2
Powering off
- Press the
(POWER)
seconds and release it. The red LED will blink
3 times and the pen will be turned off.
3
Return to Touch Home by pressing the
Touch Home button while using the touch pen.
*
When a menu is displayed on the screen, the
Touch Home button does not work.
Close the menu and then press the Touch
Home button.
button once. The red
button for more than 3