Table of Contents
Advertisement
*For models with suffix ADA, height is modified to 32" for use under lower counters
NOTE: THESE REFRIGERATORS ARE DESIGNED FOR MEDICAL OR PHARMACEUTICAL USE ONLY AND
ARE NOT INTENDED FOR USE AS HOUSEHOLD REFRIGERATORS.
Before Using Your Refrigerator:
•
Remove the exterior and interior packing.
•
Check to be sure you have all of the following parts:
3 shelves
1 crisper drawer with glass cover (models FF511L & FF521BL only)
1 handle with screws and handle seal
2 keys
•
Before connecting the unit to the power source, let it stand for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system
from handling during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
Installing the Refrigerator:
•
This appliance is designed to be free-standing only, and should not be
recessed or built in.
•
Place your unit on a floor that is strong enough to support the unit when it is
fully loaded. To level your unit, adjust the leveling legs at the bottom.
•
Allow 5 inches of space between the back and sides of the unit, which will
allow the proper air circulation to cool the compressor and condenser.
•
Locate the unit away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources
may increase electrical consumption. Extremely cold ambient temperatures
may also affect the unit's performance.
Technical Information
Models:
Capacity:
Electrical Input:
Refrigerant:
Installation:
Unit Weight:
Unit Dimensions:
Installation Instructions
FF511L (white with solid door)
FF521BL (black with solid door)
SCR450L (white with glass door)
SCR500BL (black with glass door)
4.1 cubic feet
115V AC / 60Hz / 1.4A / 100W
R134a, 1.75 oz
Free-standing
57 lbs
19.5"W x 21.5"D x 33.3"H*
4
Advertisement
Table of Contents
