Technical Information; Installation Instructions; Before Using Your Appliance; Installing The Refrigerator-Freezer - Summit CT661BI Instruction Manual

Model Numbers
Capacity
Electrical Input
Rated Current
Temperature of Freezer
Refrigerant
Installation
Ship Weight
Unit Dimensions (W x D x H)
NOTE: Specifications are subject to change without notice.

Before Using Your Appliance

•
Remove the exterior and interior packing.
•
Before connecting the unit to a power source, let it stand for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
•
Remove the crisper, drip tray and shelves and clean them and the interior surfaces of
the unit with lukewarm water using a soft cloth.

Installing the Refrigerator-Freezer

•
Place the unit on a floor that is strong enough to support the appliance when it is fully
loaded. To level the unit, adjust the two leveling legs at the front.
•
Models CT661BI and CT663BBI can be installed either free-standing, recessed or
built into an enclosure. When installing as a free-standing unit, allow at least 2"
(51mm) of space at the sides, top and rear of the unit to allow for proper air circulation
to cool the compressor and condenser. Even when built in, the unit requires at least
2" of clearance at the back, 1/8" (3mm) at both sides and 1/16" (1.6mm) at the top.
Take care that the air vents at the front of the appliance are never covered or blocked
in any way.
•
This appliance is supplied with spacers that have to be
mounted onto the condenser tube to make sure there is
sufficient clearance between the appliance and the wall.

Technical Information

CT661BI (white)
CT663BBI (black exterior)
5.1 cu. ft.
115V AC/60Hz
1.3A
5°F
R134a, 2.3oz.
Built-in or free-standing
102 lbs.
23.63" x 23" x 33.25"

Installation Instructions

:
:
4