Technical Information; Installation Instructions; Before Using Your Refrigerator; Installing The Refrigerator - Summit CM405BI Owner's Manual

Electrical Input:
Rated Current:
Power Input:
Refrigerant:
Installation:
Unit Weight:
Unit Dimensions:
* For built-in models (-BI suffix), height can be adjusted from 33¼" to 34½"
* For models with suffix ADA, height is modified to 32" for use under lower counters

Before Using Your Refrigerator:

Remove the exterior and interior packing.

Check to be sure you have all of the following parts:

1 drip tray

1 ice cube tray

2 wire shelves (models CM405, CM405BI, CM411L & CM411LBI)

2 glass shelves (models CM421BL & CM421BLBI)

1 crisper drawer with glass cover

1 handle with screws and handle seal

2 keys (except models CM405 and CM405BI)

Before connecting the unit to the power source, let it stand for approximately 2

hours. This will reduce the possibility of a malfunction in the cooling system from
handling during transportation.
 Clean the interior surface with lukewarm water using a soft cloth.

Installing the Refrigerator:

Place your unit on a floor that is strong enough to support the unit when it is fully

loaded. To level your unit, adjust the leveling legs at the bottom.
Models CM405, CM411L and CM421BL are designed to be free-standing only,

and should not be recessed or built in. On the other hand, models CM405BI,
CM411LBI and CM421BLBI are specifically designed to be built in.
Models CM405, CM411L and CM421BL: When installing, allow 5 inches of space

at the back and sides of the unit, which will allow the proper air circulation to cool
the compressor and condenser.

Technical Information

Models: CM405 & CM405BI (white without lock)
CM411L & CM411LBI (white with lock)
CM421BL & CM421BLBI (black with lock)
Capacity: 4.1 cubic feet
115V AC / 60Hz
1.4A
100W
R134a, 1.75 oz
Free-standing (CM405, CM411L, CM421BL)
Built-in (CM405BI, CM411LBI, CM421BLBI)
57 lbs
19⅞"W x 23¼"D x 33¼"H*

Installation Instructions

4