Technical Information; Installation Instructions; Before Using Your Appliance; Installing The Appliance - Summit FF1117BL Series Owner's Manual

Energy Consumption:
Energy Star approved:

Before Using Your Appliance:

•
Remove the exterior and interior packing.
•
Check to be sure you have all of the following parts:

2 wire shelves

1 crisper drawer with clear cover

1 ice cube tray
•
Before connecting the unit to the power source, let it stand for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system
from handling during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.

Installing the Appliance:

•
This appliance is designed to be free-standing only, and should not be
recessed or built in.
•
Place your unit on a floor that is strong enough to support it when it is fully
loaded. To level your unit, adjust the leveling legs at the bottom.
•
Allow 5 inches of space between the back and sides of the unit, which will
allow the proper air circulation to cool the compressor and condenser.
•
Locate the unit away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources

Technical Information

Models:
Capacity:
Electrical Input:
Rated Current:
Refrigerant:
Installation:
Shipping Weight:
Unit Dimensions:

Installation Instructions

FF1116W (white)
FF1117BL (black)
FF1158SS (black cabinet
with stainless steel door)
10.3 cubic feet
115V AC / 60Hz
1.6A
313 kWh/yr
Yes
R134a, 5.3 oz
Free-standing
166 lbs
23.63"W x 26.0"D x 58.88"H
4