Table of Contents
Advertisement
Suitable proprietary chemical cleaners may be used after first
consulting with the manufacturers' recommendations and testing a
sample on a small area of the oven cavity. Abrasive cleaning agents or
scouring pads/cloths should not be used on the cavity surface.
IMPORTANT:
•
Steam cleaners must not be used when cleaning this
appliance.
•
Once care and maintenance is complete, ensure that all parts
are correctly replaced before using the oven.
Removing the appliance door
In order to allow for easier access into the oven cavity for cleaning, it
is possible to remove the door. Before removing the door, ensure that
you have an area prepared in which you can place the removed door.
This area should ideally be protected by something like a folded, dirt-
free, towel to help prevent damage to surfaces and the door.
•
Open the door fully
•
Lift and tilt the safety catch part of
the hinge (fig. 2) so that it is fully
extended and points towards the
door.
•
Close the door most of the way, lift
it slightly and then pull it, safely but
firmly, towards you.
Fig. 2
15
Advertisement
Table of Contents
