Transmission Beacon Information Setting - Yaesu FTM-100DR Instruction Manual

12
Turn the DIAL and select [5 BARO].
13
Press and select the unit of atmospheric
pressure.
You can change the unit of atmospheric pressure.
Press to switch between hPa, mb, mmHg, and inHg.
Tip Factory default value: mb
14
Turn the DIAL and select [6 TEMP].
15
Press and select the unit of temperature.
You can change the unit of temperature.
Pressing
Tip Factory default value: °F
16
Turn the DIAL and select [7 RAIN].
17
Press and select the unit of precipitation.
You can changetheunit of precipitation.
Pressing
inches.
Tip Factory shipping value: inch
18
Turn the DIAL and select [8 WIND].
19
Press and select the unit of wind speed.
You can changetheunit of wind speed.
Press to switch between m/s, mph, and knots.
Tip Factory default value: mph
20
Press for one second or longer.
The unit of the APRS display will be set and the display will return to the previous
screen.

Transmission beacon information setting

The transmission information can be set when transmitting an APRS beacon.
1
Press for one second or longer.
The set-up menu will be displayed.
2
Turn the DIAL, select [10 APRS], then press
The menu list will be displayed.
3
Turn the DIAL, select [12 BEACON INFO SELECT],
then press
The screen for setting the transmission information
will be displayed.
4
Turn the DIAL and select [1 AMBIGUITY].
switches between °C and °F.
switches between millimeters and
.
Using the APRS set-up menu
.
65