Bottom View - Coleman BackHome LG406-SDN Assembly Instructions Manual

Attach the DOOR STOP (19b) on the grill base. See detail 2-A.
Place the right DOOR (20) on the grill frame. See detail 2-A.
Step
Install the HINGE PIN (20a) in the Door. See detail 2-B.
2
Repeat 2-A and 2-B for the left DOOR assembly.
19b
JS
JS
19b
2-A Attach the DOOR STOP (19b) to the base with
two screws (JS). Align holes in the DOOR (20)
with holes in the Control Panel and base. Hold
in place until Hinge pin is put in place.
2-A
20
Right Door
2-B Insert the HINGE PIN (20a) into the Door.
Begin with inserting the Hinge Pin into the top
holes of the Door and Control Panel.
Align the Hinge Pin to the bottom holes in the
Door and base. Lower the Hinge pin until
Hinge stop rests on the hole in the Door
bottom.
Repeat Assembles 2-A through 2-B for the Left
Door installation.
2-B
20a
Right Door
(Pg. 4)
Top View
20a
20a
Hinge Stop

Bottom View

Hardware shown actual size
(2) Qty.