Symphonic WF803 Service Manual page 21

s Button
Press to cancel a setting of timer program. Press to
correct digits when setting program (For example:
setting clock or timer program). Press to add or
delete channel numbers during channel preset.
47. ENTER Button
Press to accept a setting.
48. g Button
●
DVD mode
Press to fast forward the Disc. Press PAUSE, then
press this button to begin slow motion playback.
Press this button repeatedly to change the forward
speed of slow motion.
●
VCR mode
Press to rapidly advance the tape, or view the pic-
ture rapidly in forward during playback (Forward
Search).
49. PLAY Button
●
DVD mode
Press to begin playback.
●
VCR mode
Press to begin playback.
50. VCR Button
Press to select VCR mode for the remote control.
●
You can switch the OUTPUT mode either by
pressing OUTPUT on the front panel, or by pressing
DVD or VCR on the remote control. However, if you
press OUTPUT on the front panel first, you need
to re-select the corresponding mode by pressing
DVD or VCR on the remote control.
51. PAUSE Button
●
DVD mode
Press to pause Disc playback. Press repeatedly to
advance the DVD picture step by step (or one
frame at a time).
REAR VIEW
56 57 58
DVD/VCR VCR
AUDIO OUT
ANT-IN
L
R AUDIO IN
ANT-OUT VIDEO OUT
VIDEO IN
66 65 64
56. ANT-IN (Antenna In) Jack
Connect your antenna, Cable Box, or Direct
Broadcast System.
57. DVD/VCR AUDIO OUT Jacks
Connect the supplied audio cables here and to the
Audio In jacks of a television or other audio equip-
ment.
58. AUDIO IN Jack
Connect audio cable coming from the audio out jack
of a camcorder, another VCR, or an audio source
here.
●
VCR mode
While recording, press to temporarily stop the
recording (pause). Press a second time to resume
normal recording. You can not pause a One-Touch
Recording. Or, press during tape playback to
freeze the picture. Press to advance the picture one
frame at a time during still mode.
52. SLOW Button
During tape playback, press to view the video tape in
slow motion. Press again to resume normal playback.
This button does not affect DVD playback.
53. VCR/TV Button
Use to select VCR or TV position.
●VCR Position
To view playback, to monitor video recording or to
watch TV using the VCR tuner.
●
TV Position
To watch TV or to view one program while record-
ing another.
54. SKIP/CH. Buttons
●
DVD mode
Press to skip Chapters or Tracks.
●
VCR mode
Press to change TV channels on the VCR.
55. AUDIO Button
Press to select a desired audio language or sound
mode.
Notes
To use the remote control to operate the DVD/VCR
COMBINATION UNITS and its features, press DVD
on the remote control before pressing other DVD oper-
ation button. Verify that the green DVD OUTPUT
Light is on.
To use the remote control to operate the VCR and its
features, press VCR on the remote control before
pressing other VCR operation button. Verify that the
green VCR OUTPUT Light is on.
59 60
DVD
S-VIDEO COMPONENT AUDIO DIGITAL
OUT VIDEO OUT OUT AUDIO OUT
Y
Cb L
COAXIAL
Cr R
62 61
63
59. AC Power Cord
Connect to a standard AC outlet to supply power to
the DVD/VCR COMBINATION UNITS.
60. COMPONENT VIDEO OUT Jacks
Connect optional component video cables here and
to the component Video In jacks of a television.
61. COAXIAL Jack
Connect an optional coaxial digital audio cable here
and to the Coaxial Digital Audio In jack of a decoder
or audio receiver.
1-6-7 H9400IB