Symphonic WF803 Service Manual page 20

18. OUTPUT Button
Press to select DVD mode or VCR mode.
●
You can switch the output mode either by pressing
OUTPUT on the front panel, or by pressing DVD
or VCR on the remote control. However, if you
press OUTPUT on the front panel first, you
need to re-select the corresponding mode by
pressing DVD or VCR on the remote control.
19. Display, Remote Sensor Window
20. DISC IN Light (green)
Lights up when a disc is in the DVD Player.
21. PLAY Light (green)
Lights up during Disc playback.
22. FWD Button (DVD)
Press to fast forward the Disc. Press PAUSE, then
press this button to begin slow motion playback.
Press this button repeatedly to change the forward
speed of slow motion.
Press to skip Chapters or Tracks.
23. PLAY Button (DVD)
Press to begin playback.
24. REV Button (DVD)
Press to view the DVD picture in fast reverse motion
or to reverse playback of an Audio CD.
Press to skip Chapters or Tracks.
25. STOP Button (DVD)
Stops operation of the disc.
26. SPEED Button
Press to select the VCR
SLP)
27. POWER Button
Press to turn the power on and off.
28. Number Buttons
●
DVD mode
Press to directly select a Track (Audio CD) for
playback.
Press to program Tracks (Audio CD) for playback.
●
VCR mode
Press to select TV channels on the VCR.
To select channels, enter channel numbers as a
two-digit number for the quickest results. For
example, to select channel 6, press 0 then 6.
29. DISPLAY Button
●
DVD mode
Press to access or remove the display screen during
DVD or Audio CD playback.
●
VCR mode
Press to access or remove the VCR
tus display.
30. DVD Button
Press to select DVD mode for the remote control.
●
You can switch the OUTPUT mode either by
pressing OUTPUT on the front panel, or by pressing
DVD or VCR on the remote control. However, if you
press OUTPUT on the front panel first, you need
to re-select the corresponding mode by pressing
DVD or VCR on the remote control.
31. h Button
●
DVD mode
Press to view the DVD picture in fast reverse
motion or to reverse playback of an Audio CD.
●
VCR mode
Press to rewind the tape, or to view the picture
rapidly in reverse during the playback mode
(Rewind Search).
' s recording speed (SP or
' s on-screen sta-
1-6-6
32. STOP Button
●
DVD mode
Press to stop the disc motion.
●
VCR mode
Press to stop the tape motion.
33. RECORD Button
Press once to start a recording.
34. MENU Button
●
DVD mode
Press to display the menu of the Disc.
●
VCR mode
Press to access the VCR menu.
35. TITLE Button
36. SETUP Button
Press to enter the setup mode.
37. ZOOM Button
Enlarges part of a DVD-reproduced image.
38. MODE Button
Activates program playback or random playback
mode when playing CDs or MP3. Sets Black level
and virtual surround.
39. SUBTITLE Button
Press to select the desired subtitle language.
T-SET Button
39.
Press to put the VCR into stanby mode for a timer
recording.
40. ANGLE Button
Press to change the camera angle to see the sequence
being played back from a different angle.
41. REPEAT Button
Repeats playback of the current disc, title, chapter or
track.
42. A-B REPEAT Button
Repeats playback of a selected section.
43. SEARCH MODE Button
●
DVD mode
Press to access or remove the Search display,
which allows you to go directly to a specific
Title/Chapter/Track/Time.
●
VCR mode
Press to perform a Time Search or an Index Search.
44. CLEAR/C.RESET Button
●
DVD mode
Press to reset the setting.
●
VCR mode
Press to reset the counter. Press to exit from the
MENU screen.
45. RETURN Button
Returns to the previous operation.
46. Arrow Buttons
Use when making settings while watching the dis-
play on a TV screen.
●
VCR mode
p/o Buttons
Press to enter digits when setting program (For
example: setting clock or timer program). Press to
select the setting modes from the on screen menu.
B Button
When setting program (For example: setting clock
or timer program), press to determine your selec-
tion and proceed to the next step you want to input.
Press to determine the setting modes from the on
screen menu. Press to add or delete channel num-
bers during channel preset.
H9400IB