Symphonic WF803 Service Manual page 18

58. DVD AUDIO OUT Jacks
Connect the supplied audio cables here and to the Audio
In jacks of a television or other audio equipment (DVD
only).
59. S-VIDEO OUT Jack
Connect an optional S-Video cable here and to the S-
Video In jack of a television.
60. VIDEO IN Jack
Connect a cable coming from the video out jack of a
camcorder, another VCR, or an audio-visual source
(laser disc player, video disc player, etc.) here.
DISPLAY
Stays on when the
Stays on when repeat
A-B repeat function
track function is on.
is on.
Stays on when
Stays on when the
repeat chapter
repeat function is on.
function is on.
Stays on when
repeat title
function is on.
Lights up when the
inserted disc comes
to a pause.
Stays on when the inserted
disc is being played back.
Displays how long a current title
or track has been played back. When
a chapter or track has switched, the
number of the a title, chapter or
track is displayed.
Stays on during playback
when the repeat function
is on.
Lights up when the playback
is in a still or in a slow mode.
Works as a tape counter.
Stays on when the inserted
Also displays a channel number,
cassette is being played back.
tape speed, and remaining time for OTR
61. DVD/VCR VIDEO OUT Jack
Connect the yellow video cable (supplied) here and to
the TV
62. ANT-OUT (Antenna Out) Jack
Use the supplied RF coaxial cable to connect this jack
to the ANTENNA IN Jack on your TV.
Caution: Do not touch the inner pins of the jacks
on the rear panel. Electrostatic discharge may
cause permanent damage to the player.
DISPLAYS DURING OPERATION
DVD
Lights up when a DVD
is inserted into the tray.
LOADING THE BATTERIES
Lights up when a
1. Open the battery compartment
CD is inserted on
cover.
the tray.
2. Insert two AA batteries, with each
one oriented correctly.
3. Close the cover.
VCR
Notes
Do not mix alkaline and manganese batteries.
Do not mix old and new batteries.
1-6-4
' s Video In jack.
No disc inserted or playing
DVD menu
Tray open
Tray closed
Loading the Disc
H9400IB