Saeco Gran Baristo HD8965 User Manual page 83

Machine actions
The coff ee is too weak (see
note).
Coff ee is brewed slowly (see
note).
Coff ee leaks out of the
dispensing spout.
Causes
This might occur when the machine
is automatically adjusting the dose.
The ground coff ee is too coarse.
The ground coff ee is too fi ne.
Circuits clogged.
The brew group is dirty.
The dispensing spout is clogged or
not correctly inserted.
Note:
these problems can be considered normal if the coff ee blend has been
changed or if the machine has just been installed. In this case wait until
the machine performs a self-adjusting operation as described in the "Saeco
Adapting System" chapter.
ENGLISH
Solutions
Brew a few coff ees as described in chap-
ter "Saeco Adapting System".
Change coff ee blend or adjust the grind
as explained in the "Adjusting the Ceramic
Coff ee Grinder" chapter.
Change coff ee blend or adjust the grind
as explained in the "Adjusting the Ceramic
Coff ee Grinder" chapter.
Perform a descaling cycle.
Clean the brew group (see the "Weekly
Cleaning of the Brew Group" chapter).
Clean the dispensing spout and its holes
and insert it back correctly.
81 81