Table of Contents
Advertisement
ENGLISH
78
Displayed message
HOT WATER
INSERT
WATER SPOUT
CAPPUCCINO
INSERT THE CARAFE
WITH THE SPOUT
OPEN
RESTART TO SOLVE
Meaning of the message
Insert the water dispensing spout to start dispensing. Press "ESC" to exit.
Before beginning to dispense, insert the milk carafe with the dispensing
spout open.
The machine needs to be descaled. Follow the steps described in the
"Descaling" chapter of this manual.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case repair is NOT covered under your warranty.
The machine needs the "INTENZA+" water fi lter to be replaced.
The red light fl ashes. Press any button to exit the stand-by mode.
Take note of the code (E xx) shown on the display at the bottom.
Turn off the machine. After 30 seconds, turn it on again. Repeat the
procedure 2 or 3 times.
If the machine will not start, contact the Philips SAECO hotline in your
country and quote the code shown on the display. You can fi nd its
contact details in the warranty booklet packed separately or on www.
philips.com/support.
Advertisement
Table of Contents
